正在生成
详细信息:
检测到您已登录华为云国际站账号,为了您更好的体验,建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
API导入资源包文件 功能介绍 API导入资源包文件。 URI POST /v1/{project_id}/resource-package/api-import 表1 路径参数 参数 是否必选 参数类型 描述 project_id 是 String 项目ID。 获取方法请参考获取项目ID。
配置导入导出参数 功能介绍 配置导入导出参数。 URI POST /v1/{project_id}/exports/config 表1 路径参数 参数 是否必选 参数类型 描述 project_id 是 String 项目ID。 获取方法请参考获取项目ID。 请求参数 表2 请求Header参数
单击资源迁移页面的“资源导入”,进入资源导入页面。 图1 资源导入 单击“导入资源包”。 如果将A环境的自定义组件包导入到B环境中,需要在B环境的开发者平台注册与A环境相同的自定义组件,组件的名称、开发包等必须与A环境中的自定义组件一致。否则在B环境的大屏中无法显示自定义组件。 表1 导入资源包参数说明
import_detail String 导入明细。 最小长度:0 最大长度:4000 status Integer 结果状态:-1:未激活 0:待处理 1:成功;2:失败;3:部分成功 4:处理中。 枚举值: -1 0 1 2 3 4 error_msg String 任务失败原因。 最小长度:0 最大长度:512
单击“功能设置 > 导入导出设置”。 图1 导入导出设置 进入导入导出页面,设置导入导出相关参数。 表1 参数说明 参数 说明 服务器类型 支持obs类型。 Endpoint Endpoint Bucket名称 桶(Bucket)是OBS中存储对象的容器。 路径前缀 导入导出设置的路径前缀。
单击页面右上方的“上传文件”,进入上传文件界面。 图1 上传文件 单击“添加文件”,上传文件,并配置文件的参数。 图2 文件配置参数 表1 上传文件的参数说明 参数名称 说明 上传文件 从本地上传xlsx、xls、csv格式文件,大小不能超过50M。 自定义文件名 上传文件后,系统会自动
导出文件 在导出页面,设置导出相关参数。 表1 导出参数 参数 说明 导出名称 导出控件的名称,默认的名称“图表标题_日期_导出时间”。 文件格式 支持图片、PDF、EXCEL、WORD。 水印 如果选择“显示水印”,则导出文件显示水印,如果选择“隐藏水印”,则导出文件不显示水印。
同步迁移。 导入仪表板、数据大屏、嵌入式分析、智能分析助手时会自动导入关联的数据源和数据集。 新环境导入资源包后,需重新配置数据源的访问密码,否则数据源无法访问。 数据源资源重复导入时,仅支持相同类型的数据源导入替换。 替换导入时,如果新的项目无资源包,默认按新增导入。 同一环境
多数据集字段设置的方法请参考多表关联建模。 步骤4:新建智能分析助手并训练数据 智能分析助手基于华为云盘古大模型,选择用户创建的数据集进行训练,包括数据模型训练、指标模型训练,实现自助分析、对话式分析等多种智能分析能力。 登录智能数据洞察控制台。 在产品首页左下角选择企业项目。 在控制台选择对应的项目,进入项目空间。
填写完成项目的相关信息后,单击“确定”完成新增项目创建。 步骤2:上传数据表 本例使用上传文件的方式将本地的测试数据上传至DataArts Insight项目空间。 由于数据表需上传到数据源下,本例预先创建RDS数据源用于上传文件。连接RDS数据源的操作步骤请参考接入MySQL数据源。 选择需要操作的项目,单击项目名称进入项目空间。
自定义SQL创建数据集 在数据分析中,一些复杂的逻辑或模型可通过自定义SQL创建数据表。并且自定义SQL支持变量设置,可满足更复杂多变的分析场景。 约束与限制 当前一个数据集中最多只有一个SQL语句。 创建自定义数据集的SQL语法仅支持SELECT,FROM,WHERE,GROUP
资源迁移 API导出资源包 获取导入任务详情 API导入资源包文件
数据源授权 上传文件 编辑数据源基本信息 数据分析 新建仪表板 管理仪表板 可视化控件 数据大屏 新建大屏 大屏组件 指标 创建指标 指标管理 数据门户 创建数据门户 数据门户管理 嵌入分析 新增嵌入分析 管理嵌入分析 资源迁移 创建资源迁移 资源导出 资源导入 05 开发 DataArts
出更好的决策以便更好的解决实际的问题。DataArts Insight的仪表板支持丰富多种的可视化控件,操作方便,帮助您更好的分析数据。 约束与限制 用户拥有对所需数据集的使用权限。 仪表板制作流程 仪表板制作从新建仪表板开始,然后选择数据集、选择控件、导入字段,最后保存并发布。具体操作请参考创建仪表板。
如果批量导入,单击页面右上角的“批量导入”,弹出“导入同义词”界面,单击“上传文件”,文件上传后,单击“确定”,批量同义词导入成功。 用户可以使用excel批量导入同义词,建议单次导入不超过10000条。 只能上传.xlsx、.xls、.csv格式文件,且大小不能超过5M。
嵌入分析API 获取分享的嵌入分析信息的API操作指导。 导入导出参数API 配置导入导出参数的API操作指导。 产品实例API 查询用户已开通产品实例列表的API操作指导。 资源迁移API API导出资源包、获取导入任务详情和API导入资源包文件的API操作指导。 资源公共查询API 查询仪表板或者大屏列表的API操作指导。
deleteDatasource 上传文件数据源 datasource uploadFileDatasource 删除文件数据源 datasource deleteFileDatasource 保存文件数据源 datasource saveUploadFileDatasource 更新上传文件配置 datasource
单击确定,新增用户显示在用户列表中。 批量导入:单击“批量导入”,选择excel文件上传,单击“确定”,新增用户显示在用户列表中。 新增用户校验,使用已经添加的用户登录此服务,看是否可以操作此服务。 通用:拥有全部权限。 未激活:无法使用DataArts Insight服务。 批量修改权限
默认工作空间不允许删除。 400 24150003 操作失败!工作空间数量超出上限。 400 24150004 操作失败,请检查工作空间状态是否正常。 400 24150005 工作空间不存在。 400 24150010 工作空间成员不能为空,请重新选择。 400 24150011 工作空间成员至少需保留一个角色。
下载客户端”,弹出下载集群客户端窗口。 参数选择:选择客户端类型“仅配置文件”、选择平台类型“x86_64”,单击“确定”,客户端配置文件下载成功。 解压客户端配置文件,打开“Hive > config > hive-site.xml”文件,搜索“principal”,获取principal值。