正在生成
详细信息:
检测到您已登录华为云国际站账号,为了您更好的体验,建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
面积图 面积图可用来展示在一定时间内数据的趋势走向以及它们所占的面积比例。本文为您介绍如何为面积图添加数据并配置样式。 在面积图中,可以得出数据随时间变化的结论,例如数据随时间递增、数据随时间递减、数据是否呈现周期性变化、数据称指数性增长等。 约束限制 维度轴由数据的维度决定,至
雷达图 雷达图可以展示分析所得的数字或比率,您能够一目了然地查看各类数据指标及数据变化趋势。本文为您介绍如何为雷达图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量轴由数据的度量决定,至少选择1个度量。例如订单数量。 前提条件
线状图 线状图表 折线柱图 双轴折线柱图 台阶图 父主题: 常用图表
甘特图 甘特图是一种用于展示项目进度和时间线的工具,通过条形图直观地表示任务的开始和结束时间,适用于长期和多阶段的项目规划。通过甘特图能够清晰地理解项目的整体结构,监控任务进度,并及时调整计划以应对变化。 本文为您介绍如何为甘特图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,只能选择1个维度。
漏斗图 漏斗图能够直观地展示数据在各个阶段的转化情况,通过宽度变化来反映不同阶段转化率的高低。适用于电子商务、营销活动等场景,例如漏斗图能够清晰地展示用户从初次接触产品到最终转化的整个路径,从而为业务决策提供有力支持。 本文为您介绍如何为漏斗图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,只能选择1个维度。
多图层地图 多图层地图支持在同一个地图上叠加多个气泡图和飞线图,以展示不同类型的数据。本章节介绍多图层地图各配置项的含义。 前提条件 已创建项目,请参见创建项目。 已接入数据源,请参见新建数据源。 已创建数据集,请参见创建数据集。 已创建大屏,请参见创建大屏。 操作步骤 在大屏页
漏斗图 此章节介绍漏斗图的配置项含义。 约束限制 类别轴/维度区域只能拖入1个字段。 轴值/度量区域只能拖入1个字段。 颜色图例区域只能拖入1个字段。 字段 在“数据”标签页选择数据集,并将所需的“维度”、“维度”双击或拖拽至“字段”标签页。 表1 字段参数 参数 参数说明 字段显示内容
雷达图 雷达图可以展示分析所得数据或比率,用户能够清楚的查看各类数据指标及数据变化趋势。将多个维度的数据量映射到起始于同一个圆心的坐标轴上,结束于圆周边缘,并将同一组的点使用线连接起来。多用于维度值的分布。此章节为您介绍雷达图相关配置。 字段 在“数据”标签页选择数据集,并将所需
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 图2 全局样式 柱子样式 柱子宽度:设置柱子宽度,可以通过输入数值或单击“-”或“+”调节。输入值不能为空,输入值必须在1到100之间。
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 折线样式:平滑曲线值范围0~1。 边距 顶部:设置图表与图层顶部的间距,可以通过输入数值或单击“-”或“+”调节。 底部:设置图
高度:设置视觉映射的高度。 左侧:设置视觉映射时距离图层左侧的距离。 底部:设置视觉映射时距离图层底部的距离。 间距:设置映射之间间距。 文字:设置视觉映射时文本的字体颜色和字号大小。 映射类型:支持连续型金额自定义范围设置。范围支持对数值范围、数值颜色、对应文本设置。 范围外:支持对范围外颜色进行设置。
页面背景 用来设置仪表板的背景色。 色板 设置仪表板支持的色系,有两种模式可以选择:系统和自定义。 系统支持的色系: 自定义:可以自定义上传图片,来确定色系。 卡片圆角 配置图表卡片边角弧度,可以输入设置,也可通过控制台上的和来对弧度设置。 卡片描边 设置卡片的描边,可以输入设置,也可通过控制台上的和来对描边设置。
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 图2 全局样式 折线样式:平滑的曲线,取值范围0~1。 柱子样式 柱子宽度:设置柱子宽度,可以通过输入数值或单击“-”或“+”调
矩形树图 矩形树图用于描述考察对象之间数据指标的相对占比关系。维度值基于指标的占比结果进行分布显示,用突出、放大等效果进行数据结果表达,多用于维度值的分布。本文为您介绍如何为矩形树图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。
柱状图 柱状图表 水平柱状图 折线柱图 双轴折线柱图 甘特图 父主题: 常用图表
制作地图 创建地图 中国地图 世界地图 自定义地图 多图层地图 父主题: 大屏组件
线/面图 折线图 面积图 堆积面积图 折线柱状图 父主题: 仪表板可视化控件
堆积面积图 堆积面积图可用来展示在一定时间内数据的趋势走向以及它们所占的面积比例。本文为您介绍如何为面积图添加数据并配置样式。 与面积图类似,不同的是堆积面积图上每一个数据集的起点不同,起点是基于前一个数据集的,用于显示每个数值所占大小随时间或类别变化的趋势线,展示的是部分与整体的关系。
桑基图 桑基图可以展示一组数据到另一组数据的分流情况,其分支的宽度代表数据流量的大小。本文介绍如何创建桑基图。 约束限制 维度至少拖入2个字段,最多拖入20个字段。 度量只能拖入1个字段。 前提条件 已创建项目,请参见创建项目。 已接入数据源,请参见新建数据源。 已创建数据集,请参见创建数据集。
散点图 散点图用于展示数据的相关性和分布关系,由X轴和Y轴两个变量组成。通过因变量(Y轴数值)随自变量(X轴数值)变化的呈现数据的大致趋势,同时支持从类别和颜色两个维度观察数据的分布情况。用两组数据构成多个坐标点,考察坐标点的分布,判断多变量之间是否存在某种关联或总结坐标点的分布