正在生成
详细信息:
检测到您已登录华为云国际站账号,为了您更好的体验,建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
制作交互 交互组件的主要作用是通过添加交互的方式对数据报表页面进行美化。 前提条件 已开通DataArts Insight服务。 已创建管理数据源的项目,参考创建项目完成项目创建。 您已获取数据,参考新建数据源。 已创建所需的数据集,参考可视化新建数据集完成数据集创建。 操作步骤
词云图 DataArts Insight支持设置词云图,词云图由词汇组成类似云的彩色图形,用于展示大量文本数据。本文介绍如何创建词云图。 约束限制 维度至少需要一个字段。 度量至少需要一个字段。 前提条件 已创建项目,请参见创建项目。 已接入数据源,请参见新建数据源。 已创建数据集,请参见创建数据集。
交叉表 交叉表可以显示表中某个字段的汇总值,并对同类数据合并。其中一组列在表的左侧,另一组列在表的上部。行和列的交叉处可以对数据进行求和汇总计算。本文为您介绍如何为交叉表添加数据并配置样式。 约束限制 行表头用于生成左侧行,允许维度和度量。 列表头用于生成上方列,允许维度和度量。
饼图 饼图用于分析数据的简单占比,您可以通过饼图很直观的看到每一个部分在整体中所占的比例。本文为您介绍如何为饼图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量轴由数据的度量决定,至少选择1个度量。例如订单数量。 查询返回
散点图 散点图用于展示数据的相关性和分布关系,由X轴和Y轴两个变量组成。通过因变量(Y轴数值)随自变量(X轴数值)变化的呈现数据的大致趋势,同时支持从类别和颜色两个维度观察数据的分布情况。用两组数据构成多个坐标点,考察坐标点的分布,判断多变量之间是否存在某种关联或总结坐标点的分布
气泡图 用两组数据构成多个坐标点,考察坐标点的分布,判断多变量之间是否存在某种关联或总结坐标点的分布模式。本文为您介绍如何为气泡图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量轴由数据的度量决定,至少选择3个度量。例如订单数量。
矩形树图 矩形树图用于描述考察对象之间数据指标的相对占比关系。维度值基于指标的占比结果进行分布显示,用突出、放大等效果进行数据结果表达,多用于维度值的分布。本文为您介绍如何为矩形树图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。
雷达图 雷达图可以展示分析所得的数字或比率,您能够一目了然地查看各类数据指标及数据变化趋势。本文为您介绍如何为雷达图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量轴由数据的度量决定,至少选择1个度量。例如订单数量。 前提条件
平行坐标系 DataArts Insight支持设置平行坐标系,本文介绍如何创建平行坐标系。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量轴由数据的度量决定,至少选择2个度量。例如订单数量。 查询返回数限制设置小于等于14时,图表显示标签值,大于14图表不显示标签值。
热力图 DataArts Insight支持设置热力图,热力图常用于展示不同维度的相关性。本文介绍如何创热力图。 约束限制 维度至少需要1个字段。 Y轴/维度至少需要1个字段。 度量至少需要1个字段。 前提条件 已创建项目,请参见创建项目。 已接入数据源,请参见新建数据源。 已创建数据集,请参见创建数据集。
堆积柱状图 堆积柱状图可以展示每项数据在一段时间内的趋势及数据间的比较情况,堆积柱状图可以形象地展示一个大分类包含的每个小分类的数据,以及各个小分类的占比,显示单个项目与整体之间的关系。 本文为您介绍如何为堆积柱状图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。
堆积条形图 堆积条形图可以展示每项数据在一段时间内的趋势及数据间的比较情况,堆积条形图可以形象地展示一个大分类包含的每个小分类的数据,以及各个小分类的占比,显示单个项目与整体之间的关系。 本文为您介绍如何为堆积条形图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。
折线柱状图 折线和簇状柱图支持双轴展示不同量级数据,支持常规线图、柱图组合场景的数据展示。 组合图中折线图可以显示随时间(根据常用比例设置)而变化的连续数据,因此非常适用于显示在相等时间间隔下数据的趋势。 组合图中簇柱状图,可以比较各组数据之间的差别。 约束限制 维度轴由数据的维
簇状柱状图 簇状柱状图可以展示每项数据在一段时间内的趋势及数据间的比较情况,柱子的长短展示值的大小,易于比较各组数据之间的差别及走势。本文为您介绍如何为簇状柱状图添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量轴由数据的度
指标看板 指标看板可以一目了然地展示数据基本情况,以方便您及时掌握现状,从而快速制定并实施应对措施。因此,指标看板是发现并解决问题的有效地方法之一。本文为您介绍如何为指标看板添加数据并配置样式。 约束限制 维度轴由数据的维度决定,至少选择1个维度。例如日期、省份或产品类型。 度量
查询控件 通过查询控件可以对仪表板中的图表进行查询操作,从而展示用户需要的图表数据。查询控件支持对日期类型、文本类型、数值类型字段的查询。 前提条件 已创建仪表板,请参考创建仪表板。 操作步骤 在仪表板导航栏单击,新建查询控件。 在新建的查询控件中,单击,新建所需的查询条件。 图1
桑基图 桑基图可以展示一组数据到另一组数据的分流情况,其分支的宽度代表数据流量的大小。本文介绍如何创建桑基图。 约束限制 维度至少拖入2个字段,最多拖入20个字段。 度量只能拖入1个字段。 前提条件 已创建项目,请参见创建项目。 已接入数据源,请参见新建数据源。 已创建数据集,请参见创建数据集。
创建大屏 步骤1:选择项目 新建数据大屏有以下几种方式: 方式一:控制台直接创建 登录智能数据洞察控制台。 单击管理控制台左上角的,选择区域。 单击左下角的企业项目选择企业项目。 在DataArts Insight产品首页,单击“开始创建 > 创建大屏”,进入选择我的项目页面。
创建指标 本章节介绍如何创建指标。 操作前准备 已创建项目,请参见创建项目。 已创建数据源,请参见接入数据源。 已创建数据集,请参见创建数据集。 指标创建步骤 登录智能数据洞察控制台。 单击管理控制台左上角的,选择区域。 单击左下角的企业项目选择企业项目。 选择需要操作的项目,单击项目名称进入项目。