正在生成
详细信息:
检测到您已登录华为云国际站账号,为了您更好的体验,建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
设置文本字体的大小和字体颜色。可通过输入修改字体大小也可通过和修改字体的大小。 说明: 输入不能为空,且输入值必须在14到32之间。 对齐方式 支持左对齐和居中对齐方式。 下边距 设置面积图标题与图表之间的距离。可通过输入修改边距的大小也可通过和修改边距的大小。 说明: 输入不能为空,且输入值必须在0到32之间。
Insight支持快速搭建固定报表/大屏,实现全自然语言交互的BI自助分析,让一般业务人员和管理者也能轻松获取和分析数据。 业内痛点:业务涉及表多,报表响应慢;报表交互和样式复杂,调试工作量大。 产品优势:高性能BI引擎支持多种加速模式,10亿数据秒级响应;AutoGraph引擎自动生成可视化图表,风格统一美观。
1000。 设置自动刷新 自动刷新间隔时间支持:不刷新、1分钟、5分钟、10分钟、15分钟、30分钟设置。 样式 设置样式 设置簇状柱状图的样式参数。 表2 簇状柱状图样式参数 参数 说明 卡片标题 卡片支持有和无标题的设置。设置卡片的标题,在卡片的左上角展示。 无标题:当未勾选框时,为无标题格式。
无分割线:当未勾选框时,为无分割线格式。 有分割线:当勾选框时,为有分割线格式。支持对分割线的样式和下框边距进行设置。分割线样式和下边框支持输入设置,也可通过和进行设置。 说明: 分割线样式的输入不能为空,且输入值必须在0到8之间。在设置样式之后才可以设置下边距,分割线的下边距输入不能为空,且输入值必须在0到32之间。
无分割线:当未勾选框时,为无分割线格式。 有分割线:当勾选框时,为有分割线格式。支持对分割线的样式和下框边距进行设置。分割线样式和下边框支持输入设置,也可通过和进行设置。 说明: 分割线样式的输入不能为空,且输入值必须在0到8之间。在设置样式之后才可以设置下边距,分割线的下边距输入不能为空,且输入值必须在0到32之间。
有标题:当勾选框时,为有标题格式。 文本 设置文本字体的大小和字体颜色。可通过输入修改字体大小也可通过和修改字体的大小。 对齐方式 支持左对齐和居中对齐方式。 下边距 设置表格标题与图表之间的距离。可通过输入修改边距的大小也可通过和修改边距的大小。 分割线 卡片支持无和有分割线的设置。 无分割线:当未勾选框时,为无分割线格式。
设置文本字体的大小和字体颜色。可通过输入修改字体大小也可通过和修改字体的大小。 说明: 输入不能为空,且输入值必须在14到32之间。 对齐方式 支持左对齐和居中对齐方式。 下边距 设置交叉表标题与图表之间的距离。可通过输入修改边距的大小也可通过和修改边距的大小。 说明: 输入不能为空,且输入值必须在0到32之间。
和不勾选设置。 元数据模式指的是未被DataArts Insight处理的原始数据。 样式 本章介绍如何设置智能图的样式参数,参考表3设置,样式根据选择数据适配出的图表变化。 表3 智能图表样式参数 参数 说明 卡片标题 卡片支持有和无标题的设置。设置卡片的标题,在卡片的左上角展示。
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 图2 全局样式 折线样式:折线样式为平滑曲线,取值范围0~1之间。 柱子样式 柱子宽度:设置柱子宽度,可以通过输入数值或单击“-”或“+”调节。输入值不能为空,输入值必须在1到100之间。
设置。 样式 设置平行坐标系的样式参数。 表2 基础样式参数 参数 说明 卡片标题 卡片支持有和无标题的设置。设置卡片的标题,在卡片的左上角展示。 无标题:当未勾选框时,为无标题格式。 有标题:当勾选框时,为有标题格式。 文本 设置文本字体的大小和字体颜色。可通过输入修改字体大小也可通过和修改字体的大小。
object 组件样式面板配置。 data 是 {} 存放组件更新后的数据,保持值为{},请勿删除。 dataSlot 否 Object 组件数据面板配置,详情请参见组件数据面板配置。 event 否 Object 组件交互面板配置,详情请参见组件交互面板配置。 组件样式配置 1 2
图片 本章节主要介绍图片各配置项的含义。 样式 本章节介绍图片的样式各项配置项的含义。 尺寸位置 W:设置图表的宽,单位为px。 H:设置图表的高,单位px。 X:设置图表在画布中的位置。单位为px。 Y:设置图表在画布中的位置。单位为px。 不透明度:设置图表在画布上的透明度,
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 图2 全局样式 折线样式:设置折线的样式,平滑曲线取值范围0~1。 柱子样式 柱子宽度:设置柱子宽度,可以通过输入数值或单击“-”或“+”调节。输入值不能为空,输入值必须在1到100之间。
设置文本字体的大小和字体颜色。可通过输入修改字体大小也可通过和修改字体的大小。 说明: 输入不能为空,且输入值必须在14到32之间。 对齐方式 支持左对齐和居中对齐方式。 下边距 设置堆积面积图标题与图表之间的距离。可通过输入修改边距的大小也可通过和修改边距的大小。 说明: 输入不能为空,且输入值必须在0到32之间。
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 图2 全局样式 折线样式:平滑的曲线,取值范围0~1。 柱子样式 柱子宽度:设置柱子宽度,可以通过输入数值或单击“-”或“+”调节。输入值不能为空,输入值必须在1到100之间。
下边距 设置卡片标题与图表之间的距离。 分割线 当勾选框时,为有分割线格式。分割线样式和下边框支持输入设置,也可通过和进行设置。 说明: 分割线样式的输入不能为空,且输入值必须在0到8之间。在设置样式之后才可以设置下边距,分割线的下边距输入不能为空,且输入值必须在0到32之间。 卡片背景
分钟、15分钟、30分钟。 样式 设置中国地图样式参考表1 样式参数 表1 样式参数 参数 参数说明 尺寸位置 设置图表的宽(W)和高(H),单位为px。设置图表在画布中的位置,单位为px。 设置图表在画布上的透明度,比例越大透明程度越低。 全局样式 地图中心:通过设置顶部、左侧的数值大小调整地图中心在图层中的位置。
下边距 设置卡片标题与图表之间的距离。 分割线 当勾选框时,为有分割线格式。分割线样式和下边框支持输入设置,也可通过和进行设置。 说明: 分割线样式的输入不能为空,且输入值必须在0到8之间。在设置样式之后才可以设置下边距,分割线的下边距输入不能为空,且输入值必须在0到32之间。 卡片背景
不透明度:设置图表在画布上的透明度,可通过滑动条进行设置,也可手动输入百分比,比例越大透明程度越低。 图1 尺寸位置 全局样式 字体:设置图表中文字的字体。 图2 全局样式 折线样式:平滑曲线值范围0~1。 柱子样式 柱子宽度:设置柱子宽度,可以通过输入数值或单击“-”或“+”调节。输入值不能为空,输入值必须在1到100之间。
表1 字段参数 参数 参数说明 字段显示内容 单击列内字段的,选择“字段显示内容”单击,在弹出页面对字段显示内容进行修改。单击“确定”完成对字段显示内容的修改。 聚合方式 选择“聚合方式”单击,支持设置无聚合、求和、计数、去重计数、最大值、最小值、平均值、总体标准差、样本标准差、样本方差、区间起始值、区间结束值。