ALM-135462943 电源不在位 告警解释 The power module was removed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFa

查看更多 →

ALM-139591683 接口状态down 告警解释 The interface status changes. (ifName=[ifName], AdminStatus=[ifAdminStatus], OperStatus=[ifOperStatus], Reason=[Reason]

查看更多 →

ALM-303046784 非法设备告警 告警解释 WLAN/4/WIDS_DETECT_ROGUE_DEVICE:OID [OID] Detected rogue devices. (Device count=[INTEGER]) 非法设备告警。 告警属性 告警ID 告警级别 告警类型

查看更多 →

ALM-303046785 攻击设备告警 告警解释 WLAN/4/WIDS_DETECT_ATTACK:OID [OID] Detected attack devices. (Device count=[INTEGER]) 攻击设备告警。 告警属性 告警ID 告警级别 告警类型 303046785

查看更多 →

ALM-303046794 升级开始告警 告警解释 WLAN/4/AP_UPDATE_BEGIN:OID [OID] AP begins to update. Do not power off the AP during the upgrade. ( APM AC=[OPAQUE],

查看更多 →

ALM-303046964 接口被删除 告警解释 IFNET/4/IF_DELETE :OID [OID] Interface [interface-index] was deleted. (InterfaceName=[STRING]) 接口被删除。 告警属性 告警ID 告警级别

查看更多 →

ALM-4286849026 CPE设备告警 告警解释 WLAN/4/CPE_REPORT_ALARM: OID [oid] The CPE device generate an alarm.(CPEMac=[OPAQUE], APMac=[OPAQUE], APName=[STRING]

查看更多 →

ALM-3276800015 CPLD故障 67963 告警解释 SRM/3/ENTITYINVALID: OID [OID] CPLD is abnormal. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER]

查看更多 →

ALM-3276800017 FPGA故障 67964 告警解释 SRM/3/ENTITYINVALID: OID [OID] FPGA is abnormal. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER]

查看更多 →

ALM-3276800036 SOFTGRE不可达 告警解释 WLAN/4/AP_DETECT_SOFTGRE_DOWN:OID [OID] AP detect softgre tunnel down notify.(APMAC=[OPAQUE], DstIP=[IPADDR],

查看更多 →

ALM-3276800039 VAP创建失败 告警解释 WLAN/4/VAP_CREATE_FAIL: OID [OID] VAP create fail.(Reason=[STRING]) VAP创建失败告警。 告警属性 告警ID 告警级别 告警类型 3276800039 提示

查看更多 →

ALM-3276800045 端口互斥告警 ALM-3276800045 端口互斥告警 147456 ALM-3276800045 端口互斥告警 147457 父主题： V200版本LSW设备告警

查看更多 →

ALM-3276800061 ACL资源满 告警解释 ACLE/4/ACL_RULE RES FULL_TRAP:OID [OID] The rule resource usage has reached [INTEGER]%. (Slot=[OCTET], Stage=[OCTET])

查看更多 →

ALM-3276800094 风暴控制攻击 告警解释 SECE/4/TRAP:STORMCONTROL: OID [OID],StormControlAlarm. (IfIndex=[INTEGER], BroadcastMinRate=[INTEGER], BroadcastMaxRate=[INTEGER]

查看更多 →

ALM-3276800097 Arp报文检查 告警解释 SECE/4/ARP_PACKET_CHECK: OID [OID] Invalid packet. (SourceInterface=[OCTET], SourceIP=[OCTET], SourceMAC=[OCTET]

查看更多 →

ALM-3276800107 端口防攻击 告警解释 SECE/4/STRACKPORT: OID [OID] An port attack occurred. (Interface=[OCTET], Protocol=[OCTET]) 端口防攻击启动。 告警属性 告警ID 告警级别

查看更多 →

ALM-3276800131 堆叠口DOWN 告警解释 FSP/3/STACKPORT_DOWN: OID [OID] Stack-port [integer]/[integer] changes to down. 成员交换机的逻辑堆叠端口状态down会触发该告警，由主交换机上报。

查看更多 →

ALM-3276800137 堆叠建立失败 告警解释 FSP/3/SETUPFAILURE: OID [OID] Failed to set up a stack. (LocalSlotID=[integer], PeerSlotID=[integer], Reason=[STRING])

查看更多 →

ALM-3276800154 升级结果告警 告警解释 WLAN/4/AP_UPDATE_RESULT:OID [OID] AP updates completely. (APMAC=[OPAQUE], APName=[STRING], UpdateResult=[INTEGER]

查看更多 →

ALM-3276800160 Dying Gasp告警 告警解释 WLAN/4/AP_DYING_GASP: OID [OID] Dying gasp notify.(APMAC=[OPAQUE], APName=[STRING], APID=[INTEGER]) Dying Gasp告警。

查看更多 →

ALM-139591683 接口状态down 告警解释 The interface status changes. (ifName=[ifName], AdminStatus=[ifAdminStatus], OperStatus=[ifOperStatus], Reason=[Reason]

查看更多 →