-
CVE-2020-13401的漏洞公告 - 云容器实例 CCI
击。即使现在系统或者服务上没有直接使用IPv6地址进行网络请求通知,但是如果DNS返回了A(IPv4)和AAAA(IPv6)记录,许多HTTP库都会尝试IPv6进行连接,如果再回退到IPv4,这为攻击者提供了响应的机会。 参考链接:https://github.com/kuber
-
创建动态EIPPool - 云容器实例 CCI
networkType EIP的类型 取值范围:5_telcom(电信),5_union(联通),5_bgp(全动态BGP),5_sbgp(静态BGP),5_ipv6。 必须是系统具体支持的类型。 ipVersion 弹性公网IP的版本 取值范围:4、6,分别表示创建ipv4和ipv6。 必须是系统具体支持的类型
-
创建EIPPool - 云容器实例 CCI
privateIP 参数 参数类型 描述 id String Port ID or EIP ID ipv4 String IPv4 is the IPv4 address for traffic from the eni. ipv6 String IPv6 is the IPv6 address
-
替换EIPPool - 云容器实例 CCI
privateIP 参数 参数类型 描述 id String Port ID or EIP ID ipv4 String IPv4 is the IPv4 address for traffic from the eni. ipv6 String IPv6 is the IPv6 address
-
查询指定的EIPPool - 云容器实例 CCI
privateIP 参数 参数类型 描述 id String Port ID or EIP ID ipv4 String IPv4 is the IPv4 address for traffic from the eni. ipv6 String IPv6 is the IPv6 address
-
查询指定的EIPPool - 云容器实例 CCI
privateIP 参数 参数类型 描述 id String Port ID or EIP ID ipv4 String IPv4 is the IPv4 address for traffic from the eni. ipv6 String IPv6 is the IPv6 address
-
更新EIPPool - 云容器实例 CCI
privateIP 参数 参数类型 描述 id String Port ID or EIP ID ipv4 String IPv4 is the IPv4 address for traffic from the eni. ipv6 String IPv6 is the IPv6 address
-
创建Service - 云容器实例 CCI
allocate an IPv4 or IPv6 IP for it, and you can specify ipFamily when creating a headless Service to determine whether it will have IPv4 or IPv6 Endpoints
-
查询指定namespace下的EIPPools - 云容器实例 CCI
privateIP 参数 参数类型 描述 id String Port ID or EIP ID ipv4 String IPv4 is the IPv4 address for traffic from the eni. ipv6 String IPv6 is the IPv6 address
-
创建Endpoint - 云容器实例 CCI
0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready
-
替换Service - 云容器实例 CCI
allocate an IPv4 or IPv6 IP for it, and you can specify ipFamily when creating a headless Service to determine whether it will have IPv4 or IPv6 Endpoints
-
查询service状态 - 云容器实例 CCI
Local. ipFamily String ipFamily specifies whether this Service has a preference for a particular IP family (e.g. IPv4 vs. IPv6) when the IPv6DualStack
-
查询Service - 云容器实例 CCI
Local. ipFamily String ipFamily specifies whether this Service has a preference for a particular IP family (e.g. IPv4 vs. IPv6) when the IPv6DualStack
-
更新Service - 云容器实例 CCI
Local. ipFamily String ipFamily specifies whether this Service has a preference for a particular IP family (e.g. IPv4 vs. IPv6) when the IPv6DualStack
-
如何解决Connection timed out问题? - 云容器实例 CCI
为了确保良好的网络安全环境,华为云对25端口对外发送做了限制。 解决方法: 方法一:使用NAT网关服务,该服务能够为VPC内的容器实例提供网络地址转换(Network Address Translation)服务,SNAT功能通过绑定弹性公网IP,实现私有IP向公有IP的转换,可实现VPC内的容
-
查询指定namespace下的Services - 云容器实例 CCI
Local. ipFamily String ipFamily specifies whether this Service has a preference for a particular IP family (e.g. IPv4 vs. IPv6) when the IPv6DualStack
-
替换Endpoint - 云容器实例 CCI
0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready
-
公网访问 - 云容器实例 CCI
负载访问端口:负载提供的访问端口。 容器端口:容器监听的端口,负载访问端口映射到容器端口。 HTTP路由配置 映射路径:URL访问的路径,必须以“/”开头,如“/api/web”,也可以是根路径“/”。 负载访问端口:前面设置的负载访问端口。 如下图所示,假如ELB实例的IP地址为“10
-
查询Endpoint - 云容器实例 CCI
0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready
-
更新Endpoint - 云容器实例 CCI
0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready