time_to_target_rpo 参数说明：双集群异地灾备模式下，设置主集群发生异常发生时到已归档到OBS的恢复点所允许的time_to_target_rpo秒。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 取值范围：整型，0~3600（秒） 双集群异地灾备模式下，主集群日志将被归档到OBS。0是指不开启日志流控，1~3600是指设置主集群发生异常发生时到已归档到OBS的恢复点所允许的time_to_target_rpo秒，保证主集群因灾难崩溃时，最多可能丢失的数据的时长在允许范围内。time_to_target_rpo设置时间过小会影响主机的性能，设置过大会失去流控效果。 默认值：10

archive_timeout 参数说明：表示归档周期。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 超过该参数设定的时间时强制切换WAL段。 由于强制切换而提早关闭的归档文件仍然与完整的归档文件长度相同。因此，将archive_timeout设为很小的值将导致占用巨大的归档存储空间，建议将archive_timeout设置为60秒。 取值范围：整型，0 ~ 1073741823‬，单位为秒，其中0表示禁用该功能。 默认值：0

内核错误信息 ER RMS G: "unsupported syntax: ENCRYPTED WITH in this operation" SQLSTATE: 42601 CAUSE: "client encryption feature is not supported this operation." ACTION: "Check client encryption feature whether supported this operation." ERRMSG: "invalid grant operation" SQLSTATE: 0LP01 CAUSE: "Grant options cannnot be granted to public." ACTION: "Grant grant options to roles." ERRMSG: "unrecognized object kind: %d" SQLSTATE: XX004 CAUSE: "The object type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "unrecognized GrantStmt.targtype: %d" SQLSTATE: XX004 CAUSE: "The target type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported target types." ERRMSG: "invalid grant operation" SQLSTATE: 0LP01 CAUSE: "Grant to public operation is forbidden in security mode." ACTION: "Don't grant to public in security mode." ERRMSG: "unrecognized object type" SQLSTATE: XX004 CAUSE: "The object type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "invalid grant/revoke operation" SQLSTATE: 0LP01 CAUSE: "Column privileges are only valid for relations in GRANT/REVOKE." ACTION: "Use the column privileges only for relations." ERRMSG: "invalid AccessPriv node" SQLSTATE: 0LP01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "unrecognized GrantStmt.objtype: %d" SQLSTATE: XX004 CAUSE: "The object type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "undefined client master key" SQLSTATE: 42705 CAUSE: "The client master key does not exist." ACTION: "Check whether the client master key exists." ERRMSG: "undefined column encryption key" SQLSTATE: 42705 CAUSE: "The column encryption key does not exist." ACTION: "Check whether the column encryption key exists." ERRMSG: "large object %u does not exist" SQLSTATE: 42704 CAUSE: "The large object does not exist." ACTION: "Check whether the large object exists." ERRMSG: "redundant options" SQLSTATE: 42601 CAUSE: "The syntax 'schemas' is redundant in ALTER DEFAULT PRIVILEGES statement." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax." ERRMSG: "redundant options" SQLSTATE: 42601 CAUSE: "The syntax 'roles' is redundant in ALTER DEFAULT PRIVILEGES statement." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax." ERRMSG: "option '%s' not recognized" SQLSTATE: 42601 CAUSE: "The option in ALTER DEFAULT PRIVILEGES statement is not supported." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax." ERRMSG: "unrecognized GrantStmt.objtype: %d" SQLSTATE: XX004 CAUSE: "The object type is not supported for ALTER DEFAULT PRIVILEGES." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax to obtain the supported object types." ERRMSG: "invalid alter default privileges operation" SQLSTATE: 0LP01 CAUSE: "Default privileges cannot be set for columns." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax." ERRMSG: "unrecognized objtype: %d" SQLSTATE: XX004 CAUSE: "The object type is not supported for default privileges." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax to obtain the supported object types." ERRMSG: "could not find tuple for default ACL %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "unexpected default ACL type: %d" SQLSTATE: 0LP01 CAUSE: "The object type is not supported for default privilege." ACTION: "Check ALTER DEFAULT PRIVILEGES syntax to obtain the supported object types." ERRMSG: "invalid object id" SQLSTATE: 0LP01 CAUSE: "The object type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "undefined column" SQLSTATE: 42703 CAUSE: "The column of the relation does not exist." ACTION: "Check whether the column exists." ERRMSG: "column number out of range" SQLSTATE: 0LP01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for attribute %d of relation %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for relation %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "unsupported object type" SQLSTATE: 42809 CAUSE: "Index type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "unsupported object type" SQLSTATE: 42809 CAUSE: "Composite type is not supported for GRANT/REVOKE." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "wrong object type" SQLSTATE: 42809 CAUSE: "GRANT/REVOKE SEQUENCE only support sequence objects." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "invalid privilege type USAGE for table" SQLSTATE: 0LP01 CAUSE: "GRANT/REVOKE TABLE do not support USAGE privilege." ACTION: "Check GRANT/REVOKE syntax to obtain the supported privilege types for tables." ERRMSG: "invalid privilege type %s for column" SQLSTATE: 0LP01 CAUSE: "The privilege type is not supported for column object." ACTION: "Check GRANT/REVOKE syntax to obtain the supported privilege types for column object." ERRMSG: "cache lookup failed for database %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for foreign-data wrapper %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for foreign server %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for function %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for language %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "Grant/revoke on untrusted languages if forbidden." SQLSTATE: 0LP01 CAUSE: "Grant/revoke on untrusted languages if forbidden." ACTION: "Support grant/revoke on trusted C languages" ERRMSG: "cache lookup failed for large object %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for namespace %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "Role %s has not privilege to grant/revoke node group %s." SQLSTATE: 42501 CAUSE: "Role has not privilege to grant/revoke node group." ACTION: "Must have sysadmin privilege." ERRMSG: "Can not grant CREATE privilege on node group %u to role %u in node group %u." SQLSTATE: 42501 CAUSE: "Role has not privilege to grant CREATE privilege node group." ACTION: "Must have sysadmin privilege." ERRMSG: "cache lookup failed for tablespace %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for type %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cannot set privileges of array types" SQLSTATE: 0LP01 CAUSE: "Cannot set privileges of array types." ACTION: "Set the privileges of the element type instead." ERRMSG: "wrong object type" SQLSTATE: 42809 CAUSE: "GRANT/REVOKE DOMAIN only support domain objects." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "cache lookup failed for client master key %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for column encryption key %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "cache lookup failed for directory %u" SQLSTATE: 29P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "unrecognized privilege type '%s'" SQLSTATE: 42601 CAUSE: "The privilege type is not supported." ACTION: "Check GRANT/REVOKE syntax to obtain the supported privilege types." ERRMSG: "unrecognized privilege: %d" SQLSTATE: XX004 CAUSE: "The privilege type is not supported." ACTION: "Check GRANT/REVOKE syntax to obtain the supported privilege types." ERRMSG: "unrecognized AclResult" SQLSTATE: XX004 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "permission denied for column '%s' of relation '%s'" SQLSTATE: 42501 CAUSE: "Insufficient privileges for the column." ACTION: "Select the system tables to get the acl of the column." ERRMSG: "role with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "unrecognized objkind: %d" SQLSTATE: XX004 CAUSE: "The object type is not supported for privilege check." ACTION: "Check GRANT/REVOKE syntax to obtain the supported object types." ERRMSG: "attribute %d of relation with OID %u does not exist" SQLSTATE: 42703 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "the column has been dropped" SQLSTATE: 42703 CAUSE: "The column does not exist." ACTION: "Check whether the column exists." ERRMSG: "relation with OID %u does not exist" SQLSTATE: 42P01 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "invalid group" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "database with OID %u does not exist" SQLSTATE: 3D000 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "directory with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "function with OID %u does not exist" SQLSTATE: 42883 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "client master key with OID %u does not exist" SQLSTATE: 42705 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "language with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "large object %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "schema with OID %u does not exist" SQLSTATE: 3F001 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "node group with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "tablespace with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "foreign-data wrapper with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "foreign server with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "type with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "operator with OID %u does not exist" SQLSTATE: 42883 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "column encryption key with OID %u does not exist" SQLSTATE: 42705 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "operator class with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "operator family with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "text search dictionary with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "text search configuration with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "collation with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "conversion with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "synonym with OID %u does not exist" SQLSTATE: 42704 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "package can not create the same name with schema." SQLSTATE: 22023 CAUSE: "Package name conflict" ACTION: "Please rename package name" ERRMSG: "type is not exists %s." SQLSTATE: 22023 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "This input type is not supported for tdigest_in()" SQLSTATE: 0A000 CAUSE: "input type is not supported" ACTION: "Check tdigest_in syntax to obtain the supported privilege types" ERRMSG: "Failed to apply for memory" SQLSTATE: 53200 CAUSE: "palloc failed" ACTION: "Check memory" ERRMSG: "Failed to get tde info from relation '%s'." SQLSTATE: XX005 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "SPI_connect failed: %s" SQLSTATE: SP001 CAUSE: "System error." ACTION: "Analyze the error message before the error" ERRMSG: "permission denied for terminate snapshot thread" SQLSTATE: 42501 CAUSE: "The user does not have system admin privilege" ACTION: "Grant system admin to user" ERRMSG: "terminate snapshot thread failed" SQLSTATE: OP001 CAUSE: "Execution failed due to: %s" ACTION: "check if snapshot thread exists" ERRMSG: "terminate snapshot thread failed" SQLSTATE: OP001 CAUSE: "restart wdr snapshot thread timeoutor The thread did not respond to the kill signal" ACTION: "Check the wdr snapshot thread is restarted" ERRMSG: "set lockwait_timeout failed" SQLSTATE: XX000 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "permission denied for create WDR Snapshot" SQLSTATE: 42501 CAUSE: "The user does not have system admin privilege" ACTION: "Grant system admin to user" ERRMSG: "WDR snapshot request can not be accepted, please retry later" SQLSTATE: OP001 CAUSE: "wdr snapshot thread does not exist" ACTION: "Check if wdr snapshot thread exists" ERRMSG: "Cannot respond to WDR snapshot request" SQLSTATE: OP001 CAUSE: "Execution failed due to: %s" ACTION: "Check if wdr snapshot thread exists" ERRMSG: "query(%s) can not get datum values" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "create sequence failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check if sequence can be created" ERRMSG: "update snapshot end time stamp filled" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "query can not get datum values" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "SPI_connect failed: %s" SQLSTATE: XX000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "query(%s) execute failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "clean table of snap_%s is failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "analyze table failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "insert into tables_snap_timestamp start time stamp is failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "insert data failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful and check whether the query can be executed" ERRMSG: "update tables_snap_timestamp end time stamp is failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "clean snapshot id %lu is failed in snapshot table" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful and check whether the query can be executed" ERRMSG: "clean snapshot failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "can not create snapshot stat table" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "create WDR snapshot data table failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "insert into tables_snap_timestamp start time stamp failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "insert into snap_%s is failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "update tables_snap_timestamp end time stamp failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "create index failed" SQLSTATE: 22000 CAUSE: "System error." ACTION: "Check whether the query can be executed" ERRMSG: "analyze table, connection failed: %s" SQLSTATE: XX000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "snapshot thread SPI_connect failed: %s" SQLSTATE: XX000 CAUSE: "System error." ACTION: "Check whether the snapshot retry is successful" ERRMSG: "Distributed key column can't be transformed" SQLSTATE: 42P10 CAUSE: "There is a risk of violating uniqueness when transforming distribution columns." ACTION: "Change transform column." ERRMSG: "cannot convert %s to %s" SQLSTATE: 42804 CAUSE: "There is no conversion path in pg_cast." ACTION: "Rewrite or cast the expression." ERRMSG: "create matview on TDE table failed" SQLSTATE: 0A000 CAUSE: "create materialized views is not supported on TDE table" ACTION: "check CREATE syntax about create the materialized views" ERRMSG: "schema name can not same as package" SQLSTATE: 22023 CAUSE: "schema name conflict" ACTION: "rename schema name" ERRMSG: "Unrecognized commandType when checking read-only attribute." SQLSTATE: XX004 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Fail to generate subquery plan." SQLSTATE: XX005 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Unrecognized node type when processing qual condition." SQLSTATE: XX004 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Unrecognized node type when processing const parameters." SQLSTATE: XX004 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "SELECT FOR UPDATE/SHARE is not allowed with UNION/INTERSECT/EXCEPT" SQLSTATE: 0A000 CAUSE: "SQL uses unsupported feature." ACTION: "Modify SQL statement according to the manual." ERRMSG: "GROUP BY cannot be implemented." SQLSTATE: 0A000 CAUSE: "GROUP BY uses unsupported datatypes." ACTION: "Modify SQL statement according to the manual." ERRMSG: "Unrecognized node type when extracting index." SQLSTATE: XX004 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Ordering operator cannot be identified." SQLSTATE: 42883 CAUSE: "Grouping set columns must be able to sort their inputs." ACTION: "Modify SQL statement according to the manual." ERRMSG: "DISTINCT cannot be implemented." SQLSTATE: 0A000 CAUSE: "DISTINCT uses unsupported datatypes." ACTION: "Modify SQL statement according to the manual." ERRMSG: "Failed to locate grouping columns." SQLSTATE: 55000 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Resjunk output columns are not implemented." SQLSTATE: 20000 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "PARTITION BY cannot be implemented." SQLSTATE: 0A000 CAUSE: "PARTITION BY uses unsupported datatypes." ACTION: "Modify SQL statement according to the manual." ERRMSG: "ORDER BY cannot be implemented." SQLSTATE: 0A000 CAUSE: "ORDER BY uses unsupported datatypes." ACTION: "Modify SQL statement according to the manual." ERRMSG: "Failed to deconstruct sort operators into partitioning/ordering operators." SQLSTATE: D0011 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Pool size should not be zero" SQLSTATE: 22012 CAUSE: "Compute pool configuration file contains error." ACTION: "Please check the value of 'pl' in cp_client.conf." ERRMSG: "Failed to get the runtime info from the compute pool." SQLSTATE: 22004 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "Version is not compatible between local cluster and the compute pool." SQLSTATE: XX008 CAUSE: "Compute pool is not installed appropriately." ACTION: "Configure compute pool according to manual." ERRMSG: "No optional index path is found." SQLSTATE: 01000 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "MERGE INTO on replicated table does not yet support using distributed tables." SQLSTATE: 0A000 CAUSE: "SQL uses unsupported feature." ACTION: "Modify SQL statement according to the manual." ERRMSG: "Fail to find ForeignScan node!" SQLSTATE: P0002 CAUSE: "System error." ACTION: "Contact Huawei Engineer." ERRMSG: "sql advisor don't support none table, temp table, system table." SQLSTATE: 42601 CAUSE: "sql advisor don't support none table, temp table, system table." ACTION: "check query component" ERRMSG: "Invalid autonomous transaction return datatypes" SQLSTATE: P0000 CAUSE: "PL/SQL uses unsupported feature." ACTION: "Contact Huawei Engineer." ERRMSG: "new row for relation '%s' violates check constraint '%s'" SQLSTATE: 23514 CAUSE: "some rows copy failed" ACTION: "check table defination" ERRMSG: "new row for relation '%s' violates check constraint '%s'" SQLSTATE: 23514 CAUSE: "some rows copy failed" ACTION: "set client_min_messages = info for more details" ERRMSG: "get gauss home path is NULL" SQLSTATE: XX005 CAUSE: "gauss home path not set" ACTION: "check if $GAUSSHOME is exist" ERRMSG: "unable to open kms_iam_info.json file" SQLSTATE: 58P03 CAUSE: "file not exist or broken" ACTION: "check the kms_iam_info.json file" ERRMSG: "can not get password plaintext" SQLSTATE: XX005 CAUSE: "file not exist or broken" ACTION: "check the password cipher rand file" ERRMSG: " IAM info json key is NULL" SQLSTATE: XX005 CAUSE: "IAM info value error" ACTION: "check tde_config kms_iam_info.json file" ERRMSG: "get internal password is NULL" SQLSTATE: XX005 CAUSE: "cipher rand file missing" ACTION: "check password cipher rand file" ERRMSG: "KMS info json key is NULL" SQLSTATE: XX005 CAUSE: "KMS info value error" ACTION: "check tde_config kms_iam_info.json file" ERRMSG: "unable to get json file" SQLSTATE: 58P03 CAUSE: "parse json file failed" ACTION: "check the kms_iam_info.json file format" ERRMSG: "get JSON tree is NULL" SQLSTATE: XX005 CAUSE: "get KMS JSON tree failed" ACTION: "check input prarmeter or config.ini file" ERRMSG: "failed to get json tree" SQLSTATE: XX005 CAUSE: "config.ini json tree error" ACTION: "check input prarmeter or config.ini file" ERRMSG: "failed to set the value of json tree" SQLSTATE: XX005 CAUSE: "config.ini json tree error" ACTION: "check input prarmeter or config.ini file" ERRMSG: "http request failed" SQLSTATE: XX005 CAUSE: "http request error" ACTION: "check KMS or IAM connect or config parameter" ERRMSG: "get iam token or iam agency token is NULL" SQLSTATE: XX005 CAUSE: "connect IAM failed" ACTION: "check if your env can connect with IAM server" ERRMSG: "KMS dek json key is NULL" SQLSTATE: XX005 CAUSE: "KMS return value error" ACTION: "check KMS config paramenter" ERRMSG: "get kms dek is NULL" SQLSTATE: XX005 CAUSE: "connect KMS failed" ACTION: "check if your env can connect with KMS server" ERRMSG: "get http header is NULL" SQLSTATE: XX005 CAUSE: "http request failed" ACTION: "check IAM config parameter" ERRMSG: "create KMS dek failed" SQLSTATE: XX005 CAUSE: "KMS error" ACTION: "check KMS connect or config parameter" ERRMSG: "get KMS dek failed" SQLSTATE: XX005 CAUSE: "KMS error" ACTION: "check KMS connect or config parameter" ERRMSG: "get KMS DEK is NULL" SQLSTATE: XX005 CAUSE: "get KMS dek_plaintext failed" ACTION: "check KMS network or cipher is right" ERRMSG: "create matview with TDE failed" SQLSTATE: 0A000 CAUSE: "TDE feature is not supported for Create materialized views" ACTION: "check CREATE syntax about create the materialized views" ERRMSG: "failed to add item to the index page" SQLSTATE: XX002 CAUSE: "System error." ACTION: "Check WARNINGS for the details." ERRMSG: "index row size %lu exceeds maximum %lu for index '%s'" SQLSTATE: 54000 CAUSE: "Values larger than 1/3 of a buffer page cannot be indexed." ACTION: "Consider a function index of an MD5 hash of the value, or use full text indexing." ERRMSG: "fail to insert a tuple to an orderd index, the ordered tuple list is corrupted" SQLSTATE: XX002 CAUSE: "System error." ACTION: "Contact engineer to support." ERRMSG: "Tag field is too long." SQLSTATE: 54000 CAUSE: "Tag buffer overflow." ACTION: "Shorten tag Key." 父主题： 错误日志信息参考

log_truncate_on_rotation 参数说明：logging_collector设置为on时，log_truncate_on_rotation设置日志消息的写入方式。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 示例如下： 假设日志需要保留7天，每天生成一个日志文件，日志文件名设置为server_log.Mon、server_log.Tue等。第二周的周二生成的日志消息会覆盖写入到server_log.Tue。设置方法：将log_filename设置为server_log.%a ，log_truncate_on_rotation设置为on，log_rotation_age设置为1440，即日志有效时间为1天。 取值范围： 布尔型 on表示 GaussDB 以覆盖写入的方式写服务器日志消息。 off表示GaussDB将日志消息附加到同名的现有日志文件上。 默认值：off

log_rotation_size 参数说明：logging_collector设置为on时，log_rotation_size决定服务器日志文件的最大容量。当日志消息的总量超过日志文件容量时，服务器将生成一个新的日志文件。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 取值范围：整型，0 ~ INT_MAX / 1024，单位为kB。 0表示关闭基于容量的新日志文件的创建。 建议该值大小设置级别至少为MB级,利于日志文件的及时划分。 默认值：20MB

log_rotation_age 参数说明：logging_collector设置为on时，log_rotation_age决定创建一个新日志文件的时间间隔。当现在的时间减去上次创建一个服务器日志的时间超过了log_rotation_age的值时，将生成一个新的日志文件。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 取值范围：整型，0 ~ 35791394，单位为min。其中0表示关闭基于时间的新日志文件的创建。 默认值：1440(min)

log_destination 参数说明：GaussDB支持多种方法记录服务器日志，log_destination的取值为一个逗号分隔开的列表（如log_destination="stderr,csvlog"）。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 取值范围：字符串 有效值为stderr、csvlog、syslog、eventlog。 取值为stderr，表示日志打印到屏幕。 取值为csvlog，表示日志的输出格式为“逗号分隔值”即 CS V （Comma Separated Value）格式。使用csvlog记录日志的前提是将logging_collector设置为on，请参见使用CSV格式写日志。 取值为syslog，表示通过操作系统的syslog记录日志。 GaussDB使用 syslog的LOCAL0 ～ LOCAL7记录日志，请参见syslog_facility。使用syslog记录日志需在操作系统后台服务配置文件中添加代码： 1 local0.* /var/log/omm 默认值：stderr

log_directory 参数说明：logging_collector设置为on时，log_directory决定存放服务器日志文件的目录。它可以是绝对路径，或者是相对路径（相对于数据目录的路径）。log_directory支持动态修改，可以通过gs_guc reload实现，仅sysadmin用户可以访问。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 当配置文件中log_directory的值为非法路径时，会导致数据库无法重新启动。 通过gs_guc reload动态修改log_directory时，当指定路径为合法路径时，日志输出到新的路径下。当指定路径为非法路径时，日志输出到上一次合法的日志输出路径下而不影响数据库正常运行。此时即使指定的log_directory的值非法，也会写入到配置文件中。 在沙箱环境，路径中不可以包含/var/chroot，例如log的绝对路径是/var/chroot/var/lib/log/Ruby/pg_log/cn_log，则只需要设置为/var/lib/log/Ruby/pg_log/cn_log。 合法路径：用户对此路径有读写权限。 非法路径：用户对此路径无读写权限。 取值范围：字符串 默认值：安装时指定。

logging_collector 参数说明：控制开启后端日志收集进程logger进行日志收集。该进程捕获发送到stderr或csvlog的日志消息并写入日志文件。 这种记录日志的方法比将日志记录到syslog更加有效，因为某些类型的消息在syslog的输出中无法显示。例如动态链接库加载失败消息和脚本产生的错误消息。 该参数属于POSTMASTER类型参数，请参考表1中对应设置方法进行设置。 将服务器日志发送到stderr时可以不使用logging_collector参数，此时日志消息会被发送到服务器的stderr指向的空间。这种方法的缺点是日志回滚困难，只适用于较小的日志容量。 取值范围：布尔型 on表示开启日志收集功能。 off表示关闭日志收集功能。 默认值：on

log_filename 参数说明：logging_collector设置为on时，log_filename决定服务器运行日志文件的名称。通常日志文件名是按照strftime模式生成，因此可以用系统时间定义日志文件名，用%转义字符实现，仅sysadmin用户可以访问。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 建议使用%转义字符定义日志文件名称，否则难以对日志文件进行有效的管理。 当log_destination设为csvlog时，系统会生成附加了时间戳的日志文件名，文件格式为csv格式，例如“server_log.1093827753.csv”。 取值范围：字符串 默认值：postgresql-%Y-%m-%d_%H%M%S.log

log_file_mode 参数说明：logging_collector设置为on时，log_file_mode设置服务器日志文件的权限。通常log_file_mode的取值是能够被chmod和umask系统调用接受的数字。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 使用此选项前请设置log_directory，将日志存储到数据目录之外的地方。 因日志文件可能含有敏感数据，故不能将其设为对外可读。 取值范围：整型，0000～0777 （8进制计数，转化为十进制 0 ~ 511）。 0600表示只允许服务器管理员读写日志文件。 0640表示允许管理员所在用户组成员只能读日志文件。 默认值：0600

full_page_writes 参数说明：设置GaussDB服务器在检查点之后对页面的第一次修改时，是否将每个磁盘页面的全部内容写到WAL日志中。当增量检查点开关和enable_double_write同时打开时，则不使用full_page_writes。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 设置这个参数是因为在操作系统崩溃过程中可能磁盘页面只写入了一部分内容，从而导致在同一个页面中包含新旧数据的混合。在崩溃后的恢复期间，由于在WAL日志中存储的行变化信息不够完整，因此无法完全恢复该页。把完整的页面影像保存下来就可以保证页面被正确还原，代价是增加了写入WAL日志的数据量。 关闭此参数，在系统崩溃的时候，可能无法恢复原来的数据。如果服务器硬件的特质（比如电池供电的磁盘控制器）可以减小部分页面的写入风险，或者文件系统特性支持（比如ReiserFS 4），并且清楚知道写入风险在一个可以接受的范畴，可以关闭这个参数。 取值范围：布尔型 on表示启用此特性。 off表示关闭此特性。 默认值：on

wal_buffers 参数说明：设置用于存放WAL数据的共享内存空间的X LOG _BLCKSZ数，XLOG_BLCKSZ的大小默认为8KB。 该参数属于POSTMASTER类型参数，请参考表1中对应设置方法进行设置。 取值范围：-1~218，最小值为-1，最大值为262144，单位为8KB。 如果设置为-1，表示wal_buffers的大小随着参数shared_buffers自动调整，为shared_buffers的1/64，最小值为8个XLOG_BLCKSZ，最大值为2048个XLOG_BLCKSZ，自动调整后的值小于最小值时会调整为最小值，大于最大值时会调整为最大值。 如果设置为其他值，当小于4时，会被默认设置为4。 默认值： 1GB（128核CPU/1024G内存，104核CPU/1024G内存，96核CPU/1024G内存，96核CPU/768G内存，64核CPU/512G内存，60核CPU/480G内存，32核CPU/256G内存）；512MB（16核CPU/128G内存）；256MB（8核CPU/64G内存）；128MB（4核CPU/32G内存）；64MB（4核CPU/16G内存） 设置建议：每次事务提交时，WAL缓冲区的内容都写入到磁盘中，因此设置为很大的值不会带来明显的性能提升。如果将它设置成几百兆，就可以在有很多即时事务提交的服务器上提高写入磁盘的性能。根据经验来说，默认值可以满足大多数的情况。

walwriter_sleep_threshold 参数说明：xlogflusher进入sleep之前空闲xLog刷新的次数，达到阈值会休眠。 该参数属于SIGHUP类型参数，请参考表1中对应设置方法进行设置。 取值范围：整型，1-50000。 默认值：500（128核CPU/1024G内存，104核CPU/1024G内存，96核CPU/1024G内存，96核CPU/768G内存，64核CPU/512G内存，60核CPU/480G内存）；50（32核CPU/256G内存，16核CPU/128G内存，8核CPU/64G内存，4核CPU/32G内存，4核CPU/16G内存）

wal_file_init_num 参数说明：WAL编写器将创建的xLog段文件的数量。 该参数属于POSTMASTER类型参数，请参考表1中对应设置方法进行设置。 取值范围：整型，0~1000000。 默认值：10（128核CPU/1024G内存，104核CPU/1024G内存，96核CPU/1024G内存，96核CPU/768G内存，64核CPU/512G内存，60核CPU/480G内存）；0（32核CPU/256G内存，16核CPU/128G内存，8核CPU/64G内存，4核CPU/32G内存，4核CPU/16G内存）